Also make sure to check back next week when I break down everything you need to know about the most amazing sale of the year!
SHOP MY LOOK:
CLICK THE LINK BELOW FOR THE FULL TUTORIAL…
MATERIALS:
- 3 yards of lightweight poly/cotton blend fabric
- trim (long enough to fit around each arm. (mine measured 30″)
I added all the measurements to my dress in the image above for reference.
STEP 1: Lay one of your side panels on top of the front of your dress, rt sides together with the extra material of the panel pointing toward the middle. Serge them together along the edge. (if you don’t have a serger, you can always stitch with 1/2″ s.a. and zigzag the seam allowance to keep from fraying)
STEP 2: Open up your front and back pieces that you just stitched together and lay your second panel piece rt. sides together with the extra fabric pointing toward the center and stitch up the opposite side.
STEP 3: Open up all three of these pieces now sewn together (side panel, front, and 2nd side panel). Lay you back piece on top of it with rt sides together (this will be the exact same measurements and pattern piece as your front piece). Match up the side seams of the back piece with the unsewn sides of each panel piece and sew up either side. With the dress currently inside out, stitch up the front and back pieces along the top of the sleeves.
STEP 4: Turn your dress rt. side out, and prep and insert your sleeves.
STEP 5: Serge/finish the raw edges of the bottom of your sleeves and attach the trim along the bottom. Serge along your neckline and bottom of the dress, fold under twice, and stitch with a wide straight stitch all around the neckline and hem.